classic motorcycle forum

Motorcycle Discussions => British Bikes => Topic started by: bsaben on August 24, 2005, 09:34:37 PM

Title: Crank with alloy rod British single ID required
Post by: bsaben on August 24, 2005, 09:34:37 PM

Hello folks, I have a crank for a British (I think) single. It has an alloy rod, a stroke of 90mm, the flywheels taper inwards slightly, it has a taper on the drive side and no splines. I can email a picture if required. Can anybody help me identify this crank?  

Cheers,

BSABEN

Title: Re: Crank with alloy rod British single ID require
Post by: Gregg Kricorissian on November 21, 2005, 10:09:28 AM

This sounds like a Royal Enfield 350cc or 500cc.  Could be model G, J, or an early Bullet.

Send me a photo and I'll confirm.

.. Gregg

Title: Re: Crank with alloy rod British single ID require
Post by: bsaben on February 15, 2006, 03:50:14 AM

Hi Gregg, Thank you for the reply, sorry I have not logged on for some time. Is it still ok to email you a picture of the (R/E?) crank for ID?

Regards,

Ben.