classic motorcycle forum

Motorcycle Discussions => British Bikes => Topic started by: Mark M on August 05, 2019, 12:01:35 PM

Title: Identify this workshop tool please!
Post by: Mark M on August 05, 2019, 12:01:35 PM

This came with a load of Enfield special tools but it's not the Crusader crank extractor that I thought it was. Could anyone identify it please? And if it's of use it's for sale as cheap as you like, or swap for anything Redditch Enfield
REgards, Mark
Note: Outer diameter 5 & 3/16" inner 2 & 1/2"

Title: Re: Identify this workshop tool please!
Post by: iansoady on August 05, 2019, 01:59:54 PM

Looks like a clutch puller to me. What's the PCD and diameter of the holes? Quite nicely made with the ball bearing in the end of the screw.

Title: Re: Identify this workshop tool please!
Post by: Mark M on August 05, 2019, 02:54:46 PM

Thanks Ian, the PCD is 4 & 5/8" and (with clearance) the holes are 1/4". The whole thing is very similar to the RHS crank extractor for a RE Crusader (the right side being electrics and clutch adjustment)
REgards, Mark