classic motorcycle forum
Motorcycle Discussions => Japanese Bikes => Topic started by: whipolds on December 02, 2014, 07:42:12 PM
-
Hi - Just joined the forum and would like some advise. I had removed the oil cooler and when I replaced it with just the O ring I get a bad leak. Any advise on using a sealer along with the O RING. What started out as a simple oil change has become more complicated.
Thanks for any advise from those that have done this.
Rick
-
If the O ring in good condition it should not leak. Have you replaced it with an original or an aftermarket one? Some times the aftermarket ones are not quite the right size, and will leak. Have you checked where the O ring seats for any burrs or scratches? Do not use silicone as small bits can break off and get stuck in critical oil passageways and cause oil starvation which leads to big trouble.
-
Thanks for the reply. I will check out your suggestions.
Rick