classic motorcycle forum

Motorcycle Discussions => British Bikes => Topic started by: jfcroni on April 10, 2019, 01:20:19 PM

Title: Boyer Ignition for 750 Enfield Interceptor
Post by: jfcroni on April 10, 2019, 01:20:19 PM

Has anyone installed the Boyer for the Interceptor? Any tips or advise on this?

Title: Re: Boyer Ignition for 750 Enfield Interceptor
Post by: iansoady on April 10, 2019, 03:27:11 PM

Not on the Interceptor but many years experience on a Commando. The main weak point is the connection of the 2 wires to the sensing coils. Vibration can break these - sometimes inside the insulation which is a bugger to find. The horrible crimped pre-insulated connectors they come with should also be ditched and replaced with proper ones.

Other than that, mine worked well.

Title: Re: Boyer Ignition for 750 Enfield Interceptor
Post by: jfcroni on April 11, 2019, 01:58:10 PM

Thanks for the feedback. Any chance you could share the installation instructions? Just wondering how it works... timing, advance and all.

Title: Re: Boyer Ignition for 750 Enfield Interceptor
Post by: iansoady on April 12, 2019, 09:59:33 AM

Everything's here: http://boyerbransden.com/instructions.html (http://boyerbransden.com/instructions.html)

Title: Re: Boyer Ignition for 750 Enfield Interceptor
Post by: Mark M on April 12, 2019, 01:50:52 PM

Several members of the Interceptor Group have used the Pazon "Altair" product and prefer it. Although they are made in New Zealand they are supported by a technical team here in the UK as well.
REgards, Mark

Title: Re: Boyer Ignition for 750 Enfield Interceptor
Post by: jfcroni on April 17, 2019, 03:25:13 AM

Thanks All!