classic motorcycle forum
Motorcycle Discussions => British Bikes => Topic started by: bigjos on June 01, 2019, 05:58:17 PM
-
Does anyone know which screw goes to which side (inlet and Exhaust) on a Gold Star Oil feed to the head. The oil feed holes on the two screws are quite different - one is probably less than .060" whilst the other is more like 0.100"?
-
Does anyone know which screw goes to which side (inlet and Exhaust) on a Gold Star Oil feed to the head. The oil feed holes on the two screws are quite different - one is probably less than .060" whilst the other is more like 0.100"?
Large hole to the exhaust.