Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Martin_UK

Pages: [1] 2 3 ... 7
Autojumble / Re: Wanted, Dolls head gearbox
« on: March 18, 2018, 04:53:30 PM »
I can't help thinking you are talking about the upright box - for 1946 & 1947 - enclosed and with the round clutch adjuster cover ? 

Would the OP here bike have had such a box, they are generally shown with the dolls head box that early ??  Did we ascertain also that this bike was manufactured in 1946, and is not a refurbed WW2 bike 1st registered in 1946 ?

Wrong again...the 1947 box had a lozenge shaped clutch adjuster cover....the '46 box was a one year ONLY box with the circular disc cover.  But its irrelevant anyway as looking at Tidyrobs other post his bike is an ex WD bike and not a '46 produced bike anyway.

Autojumble / Re: Wanted, Dolls head gearbox
« on: March 17, 2018, 07:38:34 AM »
The outer case and the clutch adjuster cover are totally different....even a 5 year old kid would see the difference let alone a rivet counter  ::)

Autojumble / Re: Wanted, Dolls head gearbox
« on: March 13, 2018, 06:53:17 PM »
The near 100,000 boxes built for WW2 bikes aren't so different ?
Likewise 1930s versions.

They are if you want the correct box for 1946 and not an ex WD box.....simples

Autojumble / Re: Wanted, Dolls head gearbox
« on: March 12, 2018, 05:10:47 PM »

is it for your 1946 16H ? ...if so it's a one year only gearbox as the cover changed for 1947.

Identify these bikes! / Re: Mid 20,s Beesa,s.... I think
« on: December 30, 2017, 10:37:39 AM »
Looks like a 1927 BSA Model B to me......

British Bikes / Re: Identifying my Coventry Eale Motorcycle
« on: December 27, 2017, 08:47:00 PM »
I'm restoring a Coventry Eagle motorcycle, I bought it in bits so I do not really know how much is original
Can anyone identify the year of my bike, the frame serial number is 12623. Its got a sports motor, I guess its 172cc.

Many thanks for any help.


Hello Simmo,

I have a 1931 Coventry Eagle and it's frame number is in the low 14000's ...I know it was registered on the 18th May 1931 I would guess at  your bike being a 1930 model.

I don't believe there is a Marque Specialist anymore for CE at the VMCC...however you could try John Hodson (former VMCC Marque specialist) at his website

I'm on the lookout for a pressed steel carrier to replicate as mine is missing, unfortunately I don't have any spare CE parts to swap though.



British Bikes / Re: Wanted: Royal Enfield front mudguard, 1931- on
« on: September 28, 2013, 10:55:01 AM »
Try Renovation Spares in the UK : and ask for Simon Stephens. They manufacture most makes and models of mudguards or can make to a drawing or pattern.

British Bikes / Re: Triumph CN500 exhaust
« on: April 14, 2013, 12:01:11 PM »
Hello Bomber , The downpipe or the silencer ? where abouts in the UK are you ?

British Bikes / Re: 1914 Humber number problem sunbeam club
« on: April 04, 2013, 06:29:43 PM »
What's the big deal with having the No 28 ? surely the provenance of your 1911 Humber doesn't solely rest on this ? If it's a veteran , it's a veteran, and can be allotted any number by any club as they so choose ....the No 28 isn't a right for you to have.

BTW I am an ex Sunbeam Club member and have no axe to grind or banner to wave with the Club.

British Bikes / Re: New carb for ES2
« on: March 03, 2013, 12:10:19 PM »
Frank, strangeley enough, that's what they told me as well when I placed my order too ! Hope your experience is better than mine, although the carb arrived in the end, good job I wasn't desperate for it to finish the bike. Regards, Martin

British Bikes / Re: New carb for ES2
« on: March 02, 2013, 09:18:45 PM »
I ordered one for my Norton Big 4 and had to wait nearly 9 months for it......apparently they were waiitng for the components to arrive from their suppliers before they could put it together and despatch it........

British Bikes / Re: Triumph Bronze Head
« on: October 06, 2012, 08:51:32 PM »

Triumph didn't cast the heads in 1939 either...they were cast by Birco on behalf of Triumph as was this 1946 head. I'm sure Rob Stockdale could confirm this if you ask him.

Just goes to show there's a lot of people out there with more money than sense !

British Bikes / Re: Triumph Bronze Head
« on: October 03, 2012, 10:48:00 PM »
No I didn't post it up, I thought you did !

My head is slightly different from the current head on ebay as mine has the internal oilways as well as the external oil drains fitted so it could be fitted to either 39/40 or 46 bikes.

British Bikes / Re: Triumph Bronze Head
« on: October 03, 2012, 09:24:15 PM »
No worries.

The only reason I know this is one of the bronze heads I have is a Post War one and I had the details confirmed by Hughie Hancox when he was alive. So now someone has posted the question of its rarity on ebay for all to see...I'm interested to see how much it goes for  :)

British Bikes / Re: Triumph Bronze Head
« on: October 02, 2012, 09:45:26 PM »
It's a very rare Bronze head too as it was made in 1946 , one of a special small batch made by Birco in Birmingham for Triumph as spares for pre war T100 privateer racing bikes, hence why it has the post war part no cast into the head E2258 albeit on the other side to the iron heads being made at the time.

Well worth a punt at it's current interesting to see what it finally goes for.

Pages: [1] 2 3 ... 7