Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - smartfella

Pages: [1] 2 3 ... 5
1
British Bikes / Re: Sturmey Archer engine settings.
« on: September 02, 2019, 06:26:37 PM »
I had a chap from The Classic Motorcycle club visit me to confirm the bike for registration and he confirmed it was a Sturmey Archer. I have a Burman gearbox fitted to the bike just as was fitted back in 1928.
The bike is a New Henley 1928.
If i could get or afford a J.A.P 350cc in would. I don't think the casing is the original one as its been repaired.
Getting back to the original question! What would the timing settings be?
Very interesting conversion all the same.

2
British Bikes / Re: Sturmey Archer engine settings.
« on: September 01, 2019, 03:07:31 PM »
And another couple.

3
British Bikes / Re: Sturmey Archer engine settings.
« on: September 01, 2019, 03:06:07 PM »
Some more photos.

4
British Bikes / Re: Sturmey Archer engine settings.
« on: August 31, 2019, 04:05:19 PM »
Here you go 33d6. Engine numbers in photo. 3423, 16H

My dad bought it many years ago for a project. Sadly he got cancer and lost interest before he could start it. After 3 battles in 15 years he lost the last battle. He passed it onto me with no info at all. Sadly i know little about SV timing. I'm still learning as are we all i'm sure.
Ta for the help all.

5
British Bikes / Sturmey Archer engine settings.
« on: August 26, 2019, 05:18:53 PM »
Hi All.

Has anyone got the valve clearance, points settings etc for my SA 350cc side valve engine.
It's not been started in a long time and i believe the settings where wrong.

Thank you.

6
British Bikes / Re: Sturmey Archer engine.
« on: February 21, 2018, 09:32:45 AM »
Thanks chaps.

I don't know the history of the SV engine. It's been sitting in a garage for years and yes, this is the way i got it.
I will try what R has suggested.
Thank you.

7
British Bikes / Sturmey Archer engine.
« on: February 20, 2018, 12:45:07 PM »
Hi All.
Need some help. I have a 350cc Sturmey Archer engine in my New Henley and its very hard to turn over. It does turn over but it's too tight to kick.
What could be the problem. I have drained out the oil and refilled it but it's still the same. I can just about hand turned the engine sprocket but it's
very tight even with the spark plug out. All it seems to do is mess up my kick start ratchet teeth.
Any help is most welcome.
 :-\

8
Autojumble / Desperately in need of Burman Gearbox spares.
« on: August 26, 2017, 06:33:11 PM »
 I'm in desperate need of a Kickstart and kick start ratchet pinion for a Burman Gearbox model H.
Similar to the photo I found online.
My New Henley is sitting waiting to be started. Can anyone please help.

 

9
British Bikes / frame numbers
« on: July 06, 2017, 10:36:42 PM »
Hi All
Anyone got a way of uncovering the frame numbers on a very old rusted frame.
I can just about make out 3 out of 4 numbers.
Any help is gratefully appreciated. 

10
British Bikes / Re: Update on the New Henley 1928, 350cc
« on: May 03, 2017, 09:29:35 AM »
Thanks R

It should be a 350cc JAP OHV but as usual with restorations it's hard to find and then hard to justify the price.
If i do ever get a JAP engine i will fit it.
The rider was, Dennis Z de Ferranti. He got 2nd cos the rider that finished 2nd was disqualified.
Who cares tho, The record books say 2nd.  :)

The other reason for the 13 plate is Road Racer Lee Johnston(#13) is my 2nd cousin and i mentioned to him at the NW200 a few years back about the project.
I asked him if i finished it off and got it over to the Classic TT would he do a lap and he said if he could he would.

11
British Bikes / Re: Update on the New Henley 1928, 350cc
« on: May 02, 2017, 10:56:17 PM »
2

12
British Bikes / Re: Update on the New Henley 1928, 350cc
« on: May 02, 2017, 10:55:35 PM »
Photos

13
British Bikes / Update on the New Henley 1928, 350cc
« on: May 02, 2017, 10:54:17 PM »
Hi All,

A while ago i got some help from the good people on here with my New Henley restoration project.
I hope i got most of it right as i didn't have much to go on at the time. I am hoping to get a working Burman gearbox back for a
very nice chap in Milton who is helping me out with some issues.
 
This is how the NH looks like now. It's based on the NH that got a 2nd place at the 1929 TT.

14
Autojumble / Re: Raleigh restoration project for sale.
« on: May 02, 2017, 10:34:04 PM »
Thanks Mini-Me.
Thats makes sence. I think i will list the parts on Ebay if i don't get any takers.

15
Autojumble / Re: Raleigh restoration project for sale.
« on: May 02, 2017, 01:33:15 PM »
Photos

Pages: [1] 2 3 ... 5