Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - beardyimpman

Pages: [1] 2
1
Autojumble / VELOCETTE GTP
« on: November 24, 2017, 10:17:52 PM »
WANTED STEERING HEAD AND FORK LINKS ,WHEELS OR HUBS,ANY HELP MUCH APPRECIATED, have engine spares for swops, thanks

2
Autojumble / Re: wanted for 1924 raleigh 350
« on: November 07, 2017, 08:55:16 PM »
thanks for the reply ,i have the worm nut in the gearbox casing will it be the thickness of the worm , are the lengths all the same ,i have no worm  as a sample,, I ALSO NEED THE NUT THAT HOLDS ON THE BELT DRIVE PULLEY, ANY HELP MUCH APPRECIATED,

3
Autojumble / wanted for 1924 raleigh 350
« on: November 06, 2017, 11:11:42 PM »
clutch worm for 3 speed sturmey archer gearbox  and a hand change gear lever, thanks

4
Autojumble / new wheel rims wanted,
« on: February 28, 2016, 08:46:26 PM »
who is the best to buy new rims of, stainless or chroium, for ajs jampot model, thanks

5
Autojumble / triumph model p, wanted spares
« on: February 14, 2016, 05:51:09 PM »
need float needle and float, cam timing sprocket, thanks

6
Autojumble / model p triumph
« on: February 13, 2016, 08:22:13 PM »
WANTED, 1 MAIN BEARING ,good  second hand is ok, thanks,

7
British Bikes / model p triumph ,
« on: February 05, 2016, 10:03:16 PM »
wanted, hand change lever

8
Autojumble / Re: wanted for flat tank bsa
« on: January 17, 2016, 08:43:31 PM »
hi john, thanks for replying,these sizes are a good help  in case i find a wheel,  john

9
Autojumble / Re: wanted for flat tank bsa
« on: January 12, 2016, 09:32:10 PM »
HI JOHN, THANKS FOR YOUR HELP,no hurry just when you have time,  my bike is s,v, thanks, john

10
Autojumble / model p triumph
« on: January 11, 2016, 09:14:03 PM »
have a 1925 bike and  want to make up the brake  for the pulley  type front brake, any one with a similar brake to copy . thanks john

11
Autojumble / Re: wanted for flat tank bsa
« on: January 11, 2016, 08:50:45 PM »
HI JOHN,thanks for the reply, i would like to keep the bike as origonal as possible,but your idea is very good if you are out for runs at least you have brakes, i also have a model p triumph which has same brakes, i dont do many runs so would go for origonal brakes, what size is the bsa rims are they 26 x 2,5,  could you give me the measurments of the front hub on your bsa and the number of spoke holes, also the same for the back wheel as i want to see it is the correct hub, thanks for your help greatly appreciated, john

12
Autojumble / wanted for flat tank bsa
« on: January 10, 2016, 09:27:23 PM »
1924 bsa 350 model l24 , wanted front wheel or hub , john

13
Autojumble / Re: Triumph Model P parts needed...
« on: December 06, 2015, 09:35:03 PM »
hi if you still need model p spares , try bob johnston birmingham , if you need more details i can give you it , most helpfull with your model p ,

14
Autojumble / Re: identify the model of bsa flat tanker
« on: December 06, 2015, 08:03:47 PM »
bike is chain drive,beaded edge tyres,dummy belt rim brakes, flat tank with hand oil pump with adjustable feed and sight glass,  bsa 3 speed  gearbox no 158417, hand change on frame below fuel tank, engine sv with mag and drive out the front of engine, girder forks with single centre spring, amac carb with long inlet, control levers are inverted, will have another look at frame number, thanks

15
Autojumble / identify the model of bsa flat tanker
« on: December 05, 2015, 09:04:11 PM »
engine number,9207ap, frame number hard to make out , , b33601  any help greatly appreciated,  beardyimpman   CLEANED THE FRAME AND GOT THE FRAME NUMBER,d9208, engine number ,9207ap, ,

Pages: [1] 2