Author Topic: BSA B25 Starfire 1978 contact breaker  (Read 3488 times)

Offline jdmetcalf

  • Advanced Member
  • ***
  • Posts: 2
  • Karma: +0/-0
    • View Profile
BSA B25 Starfire 1978 contact breaker
« on: November 08, 2014, 01:17:38 PM »
Hi,
Does anyone know why the 1958 B25 Starfire contact breaker does not have a condenser wired in?  It runs without it and the wiring diagram for 1968-71 models does not show a condenser, although the previous and later models both have a condenser.
Thanks, JD.

Offline Boo

  • Advanced Member
  • ***
  • Posts: 19
  • Karma: +0/-0
    • View Profile
    • Email
Re: BSA B25 Starfire 1978 contact breaker
« Reply #1 on: February 13, 2015, 07:38:07 PM »
1958 should be a C15 with a mushroom ignition at the rear of the barrel. It should have a condenser next to the points. Maybe it has been fitted to the coil instead, same thing, other end of the same wire that's all. No condenser will give a huge spark at the points and small spark at the plug. It will also make short work of welding the points together.

Offline john.k

  • Advanced Member
  • ***
  • Posts: 615
  • Karma: +4/-0
    • View Profile
    • Email
Re: BSA B25 Starfire 1978 contact breaker
« Reply #2 on: February 21, 2015, 10:55:00 AM »
A condenser is essential,it may be fitted between the coil terminal and earth,or anywhere between the coil points lead and earth,including inside the ignition unit.Without a condenser you get very weak spark,and the engine wont rev,and the points burn. Unless an electronic unit has been fitted,of course.Regards John.