Author Topic: b31  (Read 2724 times)

Offline phil bsa b31

  • Advanced Member
  • ***
  • Posts: 18
  • Karma: +0/-0
    • View Profile
    • Email
b31
« on: July 01, 2017, 08:37:36 PM »
hi  all just putting engine back together b31 I take it there is no crankcase gasket as I did not remove any gasket material or should I make one

thanks Phil

Offline chaterlea25

  • Advanced Member
  • ***
  • Posts: 409
  • Karma: +14/-3
    • View Profile
Re: b31
« Reply #1 on: July 01, 2017, 09:42:09 PM »
Hi Phil,
No gasket used on the crankcase joint, just a smear of your favourite "goo"

John

Offline phil bsa b31

  • Advanced Member
  • ***
  • Posts: 18
  • Karma: +0/-0
    • View Profile
    • Email
Re: b31
« Reply #2 on: July 02, 2017, 08:11:46 AM »
Hi thanks john that's what I thought but better to be safe

Phil

Offline iansoady

  • Advanced Member
  • ***
  • Posts: 721
  • Karma: +6/-1
    • View Profile
    • Email
Re: b31
« Reply #3 on: July 03, 2017, 11:42:02 AM »
My favourite is Wellseal. Apply sparingly with a brush then leave for 10 - 15 minutes before assembling. Remove excess / clean brush with cellulose thinners (or acetone if you're posh).
Ian
1952 Norton ES2
1986 Honda XBR500
1958-ish Tre-Greeves