classic motorcycle forum

Motorcycle Discussions => British Bikes => Topic started by: borntohunt1993 on May 27, 2010, 03:49:35 AM

Title: 1964 Triumph
Post by: borntohunt1993 on May 27, 2010, 03:49:35 AM
We have a 1964 Triumph, it was my Grandpa's and has not been started in about thirty years. I'm 17 and looking to get it going, I can't find alot of info and need to know what kinda of oil it takes? Also what's it called, my Dad said he remembers it being called a "tiger 500" when he was a kid. Is there a site were I can put in the model # and serial #? Were is a good place online to get Triumph parts? The plug wires and coils are going to need to be replaced before starting as one of the boots is completly gone. Thanks for any help Dakota
Title: Re: 1964 Triumph
Post by: Searchguru on May 27, 2010, 12:00:58 PM
Dakota.
Try this initially http://en.wikipedia.org/wiki/Triumph_Tiger_100
Then also look at the pictures section on this site under the Vintage Bike Site tab.
This may help to jog your dad's memory. Then depending on what model of Tiger T100 you might have will help with your further enquiries.
Title: Re: 1964 Triumph
Post by: borntohunt1993 on May 28, 2010, 02:57:28 AM
What kind of oil does this bike take? Is there a good online site I can order parts from?
Title: Re: 1964 Triumph
Post by: Revband on May 28, 2010, 09:14:54 AM
The original recommended oil would be 20, 30 or 40 grade dependent on the temperature where the bike was used, now the best oil is 20w50 multigrade.

For parts you can try these links

http://www.lencraigandsons.co.uk/

https://trisupply.co.uk/

http://www.tri-corengland.com/index.html
Title: Re: 1964 Triumph
Post by: borntohunt1993 on May 28, 2010, 11:52:59 PM
Is there only that one oil tank under the seat? Does it have a transmission oil to?
Title: Re: 1964 Triumph
Post by: L.A.B. on May 29, 2010, 08:03:02 AM
Is there only that one oil tank under the seat? Does it have a transmission oil to?

I think you really need to read through the routine maintenance information in the relevant workshop manual, as then you will know exactly what's required:
http://www.classicbike.biz/Triumph/Repair/Repair.htm