classic motorcycle forum
Motorcycle Discussions => British Bikes => Topic started by: kiwiringy on March 07, 2012, 09:34:36 PM
-
Hi All
I have finally got round to getting some pictures onto this thing. I have 2 frames with similar marking format but different numbers. Looking from underneeth the format is:
FRAME 1
on the left side
PATTERN No. 283777
REQ DES No. 731168
MAT No. 28321/31
AT No. 2B3737/27
and on the right hand side is:
727410
these frames would have the gear leaver on the outside of the frame, where as the 3rd frame I have would have the gear knob coming through the frame.
Looking from underneeth, the frame ID on this one is:
on the left and is 330I7 I think. Its quite hard to see.
Non of the ID's match anything I have been able to find in books or on line. If anyone could identify them it would be great. there is quite a bit missing from the 3 bikes. I have the engines (or 3 engines which came with the frames). the tanks for all 3 are rounded (not the square edge type for soem of the models). Again I can only assume that they are coventy eagle tanks. Check my other listing today for the engines which might help identify things also.
Regards
Robin
-
the tanks for all 3 are rounded (not the square edge type for soem of the models). Again I can only assume that they are coventy eagle tanks.
Here's another Coventry Eagle which appears to have the same style tank and gear lever through the frame.
http://www.nationalmotorcyclemuseum.com.au/gallery/bikes/Coventry_Eagle.htm