classic motorcycle forum

The VintageBike Message Board => Autojumble => Topic started by: 33_Trophy on April 09, 2012, 06:05:46 AM

Title: AMAL carb
Post by: 33_Trophy on April 09, 2012, 06:05:46 AM
Hello,
Wanted AMAL 6/025 or 6/139 carburettor or a brass horizontal carb with Flange #2 (2 1/4 inch) or Amal T15TT32 carburettor.


Tx
Title: Re: AMAL carb
Post by: 33_Trophy on June 10, 2012, 08:51:09 PM
Hello,

a 6/015 would also fit.

Tx
Title: Re: AMAL carb
Post by: Spanner on August 28, 2012, 10:53:35 AM
I have 4 AMALs but not sure of the type, they are all remote float chamber types. 
One has  flange mounting (1 1/16" choke & 2" stud centres),  there is another with flange but choke is about 7/8".
Two carbs are circular 'pipe' mounting.
Contact me on mjheseltinesurf@hotmail.co.uk and I will send photos & more info.