classic motorcycle forum

Motorcycle Discussions => British Bikes => Topic started by: phil bsa b31 on July 01, 2017, 08:37:36 PM

Title: b31
Post by: phil bsa b31 on July 01, 2017, 08:37:36 PM

hi  all just putting engine back together b31 I take it there is no crankcase gasket as I did not remove any gasket material or should I make one

thanks Phil

Title: Re: b31
Post by: chaterlea25 on July 01, 2017, 09:42:09 PM

Hi Phil,
No gasket used on the crankcase joint, just a smear of your favourite "goo"

John

Title: Re: b31
Post by: phil bsa b31 on July 02, 2017, 08:11:46 AM

Hi thanks john that's what I thought but better to be safe

Phil

Title: Re: b31
Post by: iansoady on July 03, 2017, 11:42:02 AM

My favourite is Wellseal. Apply sparingly with a brush then leave for 10 - 15 minutes before assembling. Remove excess / clean brush with cellulose thinners (or acetone if you're posh).