classic motorcycle forum

Motorcycle Discussions => European and Other Bikes => Topic started by: marley 02 on July 11, 2020, 02:50:23 PM

Title: Zundapp 200s
Post by: marley 02 on July 11, 2020, 02:50:23 PM

Hi all,
i have just rebuilt a Zundapp 200s, although the bike will run  ok, when the throttle is opened the bike will stop  its probably something simple, but try as i may, i cannot identify whats wrong , hope theres help out there.
Pete

Title: Re: Zundapp 200s
Post by: Rex on July 11, 2020, 04:12:09 PM

Sounds like a partially blocked jet in the carb. Did it run right before you rebuilt it?

Title: Re: Zundapp 200s
Post by: marley 02 on July 11, 2020, 05:54:35 PM

Hi, thanks for the reply I  have cleaned the carb out ect perhaps another clean would not do any harm.
I bought the engine online from Slovieia, its a good motor just needs tinkering with.
Thanks again Pete

Title: Re: Zundapp 200s
Post by: chaterlea25 on July 12, 2020, 09:56:56 PM

Hi,
Does it have a Bing carb?
I remember one where the main and pilot jets/ holders could be swopped around
it would tick over but not rev

John