1
Autojumble / Clutch assembly
« on: January 19, 2023, 03:04:52 PM »
Hi Im looking for a clutch assembly for a 1921 SUN motorcycle with a VTS engine and Sturmey Archer gearbox. I would be grateful for any info. Many thanks Bud.
News:
Have you noticed we've moved..? We are now on www.classicmotorcycleforum.com. Don't forget to bookmark it!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
3
British Bikes / Re: Villiers 12C
« on: November 04, 2022, 12:24:36 PM »
33d6 thank you very much for your info. A good set of pullers and lots of care it is then. Stay safe.
4
British Bikes / Villiers 12C
« on: November 03, 2022, 05:37:28 PM »
Hi I am trying to remove the sprockets from this 12C engine, I have removed the nut but the sprockets wont budge is it a case of heat and pullers or do I need a tool for the job. Any info or diagram for the 12C would be gratefully received. Many thanks Bud.
5
British Bikes / Re: Headstock frame number.
« on: October 05, 2022, 11:25:30 AM »
Thank you so much for all your info, I do have the plunger suspension for it so it looks like a project for the future. Many thanks Bud.
6
British Bikes / Re: Headstock frame number.
« on: October 05, 2022, 07:16:03 AM »
The number on the Headstock runs from bottom upwards on the left hand side as you look from the front and it is 44S45359. I will try and get a photo of the number sometime today.
7
British Bikes / Re: SUN CHALLENGER PROJECT
« on: October 04, 2022, 07:19:49 PM »
I dont know if this will help if you decide to fabricate the plungers but this is what they look like. I think the center plunger bar is 8 inches long but you will know from the frame. I will try and get photos of the inners, ie springs etc and other measurements if this is the route you are going to take. I hope you find a set first. good look.
8
British Bikes / Headstock frame number.
« on: October 04, 2022, 09:28:25 AM »
Hi I have what I believe isa DMW square tubed frame, but the number on the headstock does not relate to DMW, just wondered if anyone knows what frame or model that this number belongs to The number is 44S 54359. On closer inspection it looks like the headstock may have been welded on to suit different forks for trialing or moto cross. Fingers crossed.
9
British Bikes / Re: Villiers engines
« on: May 03, 2022, 06:40:35 AM »
Many thanks for the info R thats a great help.
10
British Bikes / Villiers engines
« on: May 02, 2022, 09:49:42 AM »
Hi I have I think new old stock Villiers con rods D7117 and crankshaft D9744 could anyone tell me what engines they belong to. Many Thanks.
11
British Bikes / Re: Villiers 30C engine
« on: February 02, 2022, 05:11:35 PM »
Hi 33d6 thanks for the reply, having cleaned up the pot I can now see that the number is A9020 so happy with that. The engine prefix is 433B and sods law its not on my Villiers list. Thanks again Bud.
12
British Bikes / Villiers 30C engine
« on: February 01, 2022, 07:06:24 PM »
Hi I have what i think is a 30C Villiers engine, the casting number on the cylinder is A5020 but according to Villiers part numbers it should be A9020. Could any tell me what engine the A5020 belongs to. Many thanks Bud.
13
British Bikes / Re: Villiers 30C primary chain
« on: January 14, 2022, 05:22:23 PM »
Thanks for the info guys, think i will have a go at making a tensioner, cheers Ian.
14
British Bikes / Villiers 30C primary chain
« on: January 07, 2022, 12:37:04 PM »
Hi being a novice on this engine i thought i would seek a little help. I have purchased a new primary chain for this engine only to find it is just as slack as the old one, it states it is an endless chain but can I remove two links and replace a split link to take up the slack or is there a tensioner on the market for this type of engine. Many thanks Bud.
15
British Bikes / Re: 6" headlamp shell but lights are 5 3/4?
« on: August 04, 2021, 07:07:09 PM »
hiya Doug I have asked my brother to take a couple of pics of our Challenger headlight and i will post them on here. I put the pics of the rims on here. This is the original lens and note the number at the bottom 575 ( 5 3/4 ) Hope this makes sense lol. All the best Bud.
Pages: [1] 2