Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - albert

Pages: [1] 2
1
British Bikes / BSA Sloper kickstarter spindle wanted!
« on: January 04, 2023, 02:05:22 PM »
Wanted: kickstarter drive for 500ccm BSA Sloper 1929/30

Who can repair it?
email to : axel.winklbauer@gmx.de

2
British Bikes / Magneto chains for Ariel and Royal Enfield
« on: January 04, 2023, 01:56:04 PM »
Royal Enfield new magneto chains available! I have managed the reproduction of genuine Renold chains by the German Renold headquarters , which is 20 miles away.
For sale: heavy duty chains, endless riveted:
Renold 111044/ 35 rollers 1351 chain 1/2" x 1/8" for Royal Enfield Sloper etc. and Ariel


Renold RN 111044/54 rollers for Royal Enfield 1000 model K and 1140 model K/KX
50.- euros each plus postage, no profit on these.

email: axel.winklbauer@gmx.de

3
British Bikes / Royal Enfield fishtail silencer right hand side
« on: February 20, 2022, 10:13:10 AM »
Hello,
wanted 1931- on     right hand fishtail silencer for Royal Enfield model J, H, K, etc..

I have already got the l/h type at the Netley autojumble a few years ago.
email: axel.winklbauer@gmx.de

4
Autojumble / vintage morocycle horn push button wanted!
« on: November 16, 2020, 10:49:45 AM »
Hello,
looking for such a large  black horn push for one inch handlebars.
Also, searching for any  Sackville levers for one  inch handlebars.
Kind regards
Albert

email: axel.winklbauer@gmx.de

5
The Classic Biker Bar / Transport U.K. to Germany
« on: June 09, 2020, 04:26:12 PM »
Hello,
I am looking for  a gentleman, who will travel with his van or trailer  to Germany sometime in near future despite the corona lockdown, to carry a large vintage two-seater sidecar from Coventry to the Continent! Good price paid!


email: axel.winklbauer@gmx.de

6
British Bikes / 1931 Royal Enfield crankshaft wanted
« on: May 21, 2019, 11:31:25 AM »
Hallo,
looking for RE longstroke crankshaft 99,25 mm sroke  for model 500 ohv J 31 or 570 H 31,
conrod number: 15166
flywheel numbers: 15171 and 15172
or complete engine!
Also,wanted: Sturmey Archer LS280 B gearbox or spares.
Will collect around Founder`s Day weekend.

email: axel.winklbauer@gmx.de

7
British Bikes / Royal Enfield timing cover for model 976ccm K 1931-36 wanted
« on: February 26, 2018, 12:54:49 PM »
Hello,
I am in need of a timing cover for model K.
There are 2 versions, the earlier timing cover with magneto chain outer cover,1931-on or the later type ca. 1933-36 with two (inner and outer) magneto chain covers.
anything concidered.

email: axel.winklbauer@gmx.de

8
British Bikes / Royal Enfield model K 1933-36 inner magneto chain cover wanted!
« on: September 20, 2017, 12:04:20 PM »
hello,
Royal Enfield has modified the timing cover of model 1933 K -on,   to a 3 piece design, timing cover, inner and outer magneto chain cover, because the previous design was  prone for breaking .
I am looking for the inner magneto chain cover. The outer magneto chain cover has been modified to take a Pilgrim oil pump, instead of the previous brass Enfield pump.

The attached photos show the timing cover and the outer magneto chain cover and how the inner (intermediate) magneto chain case should look like in position onto the  timing cover.
Yours sincerely
Albert

9
British Bikes / Royal Enfield 1931 crankshaft wanted
« on: September 20, 2017, 11:55:48 AM »
Hello,
I am looking for a 1931 RE crankshaft (or flywheels) for model J 500 ohv  or H 570 sv ,sloper , 99.25 mm stroke,
or complete bottom end.
Flywheel Diameter 8 inches: 203,2 mm
flywheels are marked with numbers: 15172 drive side, 15171 Timing side.
This is the first dry-sump engine with integral oil tank in front of the crankcase.
The piston has a diameter of 80 mm (because of the longstroke engine) instead of 84 mm piston on the ordinary model JA and H.
Thank you for looking.
Yours sincerely
Albert
email: axel.winklbauer@gmx.de

10
British Bikes / Wanted: sprockets for 1927 Sturmey Archer 3 speed heavyweight gearbox
« on: January 06, 2017, 04:55:51 PM »
Wanted:
25 T mainshaft sleeve gear  and intermediate mainshaft sliding pinion 21 T.
Any new spares available?
The 3 gear pinion dogs are worn.
email: axel.winklbauer@gmx.de

Thank you for your help.
Yours sincerely
Albert

11
British Bikes / Royal Enfield heavy weight sidecar wanted, 1931-on, for V-Twin
« on: December 06, 2015, 09:35:39 AM »
Hello,
I am looking for a genuine Royal Enfield made sidecar, chassis no. 3 , touring type or  2 seater, anything considered, or just the coach built body !!!

The Royal Enfield sidecar frame can be identified by the long straight tube leading from the motorcycle´s steering head to the rear wheel spindle.
Who can help?
Can collect around Stafford Classic Bike Show- Weekend  23/24 . April 2016!!!
email: axel.winklbauer@gmx.de

12
British Bikes / Royal Enfield exhaust pipe clip wanted
« on: November 15, 2015, 03:57:39 PM »
Hello,
I am looking for one  vintage Royal Enfield exhaust pipe clip to cylinderhead stub , inner diameter 2 inches !
Was used on model K 1930 -on, many slopers etc..
Who can help?
Yours sincerely
Albert
email: axel.winklbauer@gmx.de

13
British Bikes / Royal Enfield fishtail silencer 1931 wanted
« on: June 17, 2015, 08:21:40 PM »
hello,
I am looking for a pattern to remanufacture a pair of fishtail silencers for a 1931 Royal Enfield Sloper. Condition not important.
Who can help?
Who is able to reproduce this type of silencer?
Yours sincerely
Albert
email: axel.winklbauer@gmx.de

14
British Bikes / Royal Enfield vintage sports sidecar mystery
« on: June 20, 2014, 09:18:56 PM »
hello,
after 18 years of searching,  I have had the luck to purchase a genuine 1927 Aluminium sports sidecar for my Royal Enfield 182 sports  V-twin, dismantled, box job , for restoration.
In comparison to a similar 1927 RE -sidecar frame for the same bike, this one has an enlarged ground clearance of approx. 4 inches!!! Therefore, the connecting tubes have different lengths and the leaf springs of the sidecar body have been fixed under the sidecar frame to attach the body in a lower position in relation to the higher chassis.The rear cast iron lug for the attachment taper bolt is different.
Is there another sidecar with the same specification? Or do you know ,why Royal Enfield offered this modified sidecar frame? I couldn`t find any information in the sales catalogues.
Yours sincerely
Albert




15
British Bikes / AJS M7, K7 engine wanted!
« on: April 06, 2014, 08:43:37 AM »
Hello,
my friend Marco is restoring a complete rolling chassis, but unfortunately, the engine is missing!
Who on earth has a surplus engine, 350 ccm ,ohc, 1927/28, M7,K7,
to get this wonderful sports model on the road, back again?
Thank you for your help!
Yours sincerely
Axel                          email: axel.winklbauer@gmx.de
FAX: 0049-5271-694 45 03

Pages: [1] 2