Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - albert

Pages: 1 2 [3]
31
British Bikes / Re: Royal Enfield Hepolite piston 3495 or 8510,plus 0.060" wanted
« on: October 09, 2013, 12:11:21 PM »
Piston no.3495 is the piston for the early 1140 engine,1933 to 1936, (export models) which is in fact an early 976ccm engine with enlarged stroke to 99,25mm and alloy spacers under the cylinder barrel flange!
This piston (piston skirt is too long to use in the 976 ccm-engine) is totally different to the 1140 KX pistons used from 1936 to 1939.(four oil pumps engine).
Therefore I am looking for no.3495 as replacement for the original 570 piston.

32
British Bikes / Re: Royal Enfield Hepolite piston 3495 or 8510,plus 0.060" wanted
« on: October 07, 2013, 04:55:41 PM »
For Royal Enfield 1931 570ccm SV Sloper.
This motorcycle was only made in that year!

33
British Bikes / Royal Enfield Hepolite piston 3495 or 8510,plus 0.060" wanted
« on: October 04, 2013, 09:46:18 AM »
Hello,
I am looking for this piston 85,5 mm 0.060" oversize.
Thank you for searching!
Yours sincerely

34
British Bikes / Re: Wanted: Royal Enfield front mudguard, 1931- on
« on: September 28, 2013, 09:16:43 AM »
Hello,
here are the photos.
Thank you for looking!
Yours sincerely
Albert

35
British Bikes / Wanted: Royal Enfield front mudguard, 1931- on
« on: July 21, 2013, 03:22:48 PM »
Hello,
I am looking for an original Royal Enfield  front mudguard for model J,H, K etc. with centre rib, mudsplash, width 7 inches or 17 cm.
Yours sincerely
Axel
email. axel.winklbauer@gmx.de

36
British Bikes / Royal Enfield 1140 KX rolling chassis and gearbox wanted !!!
« on: April 20, 2013, 11:02:28 AM »
hello friends,
I am looking for a Royal Enfield frame,forks ,wheels, gearbox etc.. ......  my 1140 engine is waiting to start a new life!
Yours sincerely
Axel
email: axel.winklbauer@gmx.de

37
British Bikes / Re: Royal Enfield 1931 spares wanted
« on: February 06, 2013, 11:44:29 AM »
Hello,
I am still looking for these spares!!!

The conrod has embossed letters WHT or W 15166 with 7 3/4" distance between centres.
A complete crankshaft or spare engine would be great!

Would like to get in touch with other owners.

email: axel.winklbauer@gmx.de



38
British Bikes / Royal Enfield conrod W15166 wanted
« on: November 27, 2012, 11:00:13 AM »
Hello,
please, have a look for this Enfield conrod !!!!!
Thank you very much!

email: axel.winklbauer@gmx.de

39
British Bikes / Royal Enfield 1931 spares wanted
« on: November 27, 2012, 10:57:44 AM »
Hello,
I am looking for several parts for 1931 Royal Enfield model J. This is the longstroke model with duplex cradle frame,  like the V-Twin model K. This model was only built in 1931 and 1932.
I am in need of  both mudguards, rear mudguard carrier, 4 speed gearbox with 2 gear change rods,  conrod W15166 , rear chain guard, old fishtail silencer as pattern for manufacture,etc..
W.H.Y.
Thank you for your help!
Yours sincerely
Albert
email: axel.winklbauer@gmx.de

40
Autojumble / Alpha big-end no. RE 11 wanted
« on: March 08, 2011, 07:36:24 PM »
Wanted:
Royal Enfield big -end Alpha No. RE 11 , Enfield-no. 10588 or 15166.
Thank you!

41
Autojumble / Hepolite piston no. 3556 wanted
« on: March 08, 2011, 07:34:03 PM »
Wanted: Royal Enfield piston, Hepolite no. 3556, 80mm dia. , any size required.
Thank you for searching!
Yours sincerely
Albert

42
Autojumble / 1931 Royal Enfield 500 ohv Sloper parts wanted
« on: February 26, 2011, 12:40:24 PM »
Hello,
I am looking for several parts for 1931 Royal Enfield model J. This is the longstroke model with duplex cradle frame,  like the V-Twin model K. This model was only built in 1931 and 1932.
I am in need of  both mudguards, rear mudguard carrier, 4 speed gearbox with 2 gear change rods,  conrod W15166 , rear chain guard, old fishtail silencer as pattern for manufacture,etc..
W.H.Y.???
Thank you for your help!
Yours sincerely
Albert
email: axel.winklbauer@gmx.de

43
Autojumble / Re: Royal Enfield rear wheel or hub with 7 inch brake wanted
« on: February 14, 2011, 05:34:48 PM »
I don`t think ,that Broughs use the same wheel, because the circle for the 3 cush drive retaining bolts is smaller.
Broughs mostly have 8 inch brakes.
I can send photos, if desired.

44
Autojumble / Royal Enfield rear wheel or hub with 7 inch brake wanted
« on: February 13, 2011, 02:46:07 PM »
Looking for 7 inch Enfield rear wheel or hub, 1931 -on, used on model H,J (99,25 mm longstroke) 1931-32, model K 1931 to 1935.
Also wanted:  parts for 1931/32 model J , 500ccm with duplex frame:
3 speed gear change lever with gate, mudguards, old fishtail silencer as pattern for remanufacture.
Thank you!

Pages: 1 2 [3]