« previous next »
Pages: [1]

Author Topic: Crank with alloy rod British single ID required  (Read 3921 times)

Offline bsaben

  • Advanced Member
  • ***
  • Posts: 15
  • Karma: +0/-0
  • I love YaBB 1G - SP1!
    • View Profile
Crank with alloy rod British single ID required
« on: August 24, 2005, 09:34:37 PM »
Hello folks, I have a crank for a British (I think) single. It has an alloy rod, a stroke of 90mm, the flywheels taper inwards slightly, it has a taper on the drive side and no splines. I can email a picture if required. Can anybody help me identify this crank?  

Cheers,

BSABEN
Logged

Gregg Kricorissian

  • Guest
Re: Crank with alloy rod British single ID require
« Reply #1 on: November 21, 2005, 10:09:28 AM »
This sounds like a Royal Enfield 350cc or 500cc.  Could be model G, J, or an early Bullet.

Send me a photo and I'll confirm.

.. Gregg
Logged

Offline bsaben

  • Advanced Member
  • ***
  • Posts: 15
  • Karma: +0/-0
  • I love YaBB 1G - SP1!
    • View Profile
Re: Crank with alloy rod British single ID require
« Reply #2 on: February 15, 2006, 03:50:14 AM »
Hi Gregg, Thank you for the reply, sorry I have not logged on for some time. Is it still ok to email you a picture of the (R/E?) crank for ID?

Regards,

Ben.
Logged
Pages: [1]
« previous next »