« previous next »
Pages: [1]

Author Topic: Twin leading front brake.  (Read 3467 times)

Offline dougie@35

  • Advanced Member
  • ***
  • Posts: 5
  • Karma: +0/-0
  • I love YaBB 1G - SP1!
    • View Profile
    • Email
Twin leading front brake.
« on: February 19, 2007, 01:21:38 AM »
I have fitted a twin leading front brakeplate to my A10 to improve the braking (Anyone who has driven one will know what i mean) Can anyone tell me the best way to setup and ajust this type of brake...
Logged

Offline TBS

  • Advanced Member
  • ***
  • Posts: 278
  • Karma: +0/-0
    • View Profile
    • Email
Re: Twin leading front brake.
« Reply #1 on: February 19, 2007, 07:12:06 AM »
OK to set up a tls brake with a tie rod:
Firstly remove one clevis pin from one arm. Then with the aid of a friend, get him to pull up hard on both brake arms with a spanner on each brake cam nut. Adjust tie rod in or out so that the tie rod fork end is exactly in line with the clevis hole, sorted. Don't forget to replace with a new split pin. Of course this will only work if the drum is round, and not heat/tension distorted.
Logged
Pages: [1]
« previous next »