« previous next »
Pages: [1]

Author Topic: Petrol tap cork  (Read 7502 times)

Offline Goldy

  • Advanced Member
  • ***
  • Posts: 158
  • Karma: +7/-1
  • Restore, Ride, Relive
    • View Profile
Petrol tap cork
« on: March 08, 2009, 03:19:04 PM »
can anyone advise on fitting new cork seal to pull push type petrol taps.
Logged

Offline Goldie

  • Advanced Member
  • ***
  • Posts: 102
  • Karma: +0/-0
  • I love YaBB 1G - SP1!
    • View Profile
Re: Petrol tap cork
« Reply #1 on: March 08, 2009, 09:35:13 PM »
You can buy the actual plunger fitted with new cork for peanuts.
Logged

Offline cpp01

  • Advanced Member
  • ***
  • Posts: 9
  • Karma: +0/-0
    • View Profile
Re: Petrol tap cork
« Reply #2 on: March 13, 2009, 07:38:46 PM »
Hi,

If you want to keep the cap and just change the seal then new cork seals are plentiful on eBay and are cheap, just measure up what size you need. Discussion about getting them to squeeze on here http://www.vintagebike.co.uk/cgi-bin/yabb2/YaBB.pl?num=1234644389/0.

Hope that helps,
cpp01
Logged

Offline Rex

  • Advanced Member
  • ***
  • Posts: 1527
  • Karma: +11/-69
  • I love YaBB 1G - SP1!
    • View Profile
Re: Petrol tap cork
« Reply #3 on: March 17, 2009, 08:16:01 AM »
That's tank caps it seems to me, while this is petrol taps?

Some plungers come apart to fit new corks, but if you haven't got that sort (and most haven't) then it's buy new complete plungers time.
Logged

Offline douglas234

  • Advanced Member
  • ***
  • Posts: 2
  • Karma: +0/-0
  • I Love YaBB 2!
    • View Profile
Re: Petrol tap cork
« Reply #4 on: March 17, 2009, 12:56:09 PM »
You first need to determine the type of fuel tap you have.  As previously noted, corks are readily available from many sources.  Try draganfly.co.uk, the Ariel and BSA folks.  If really desperate, you can even make you own from a piece of cork.  Dont forget to soak the corks in hot water or let them sit in a bit of oil before installing them.

John
Logged
Pages: [1]
« previous next »