Author Topic: villiers wont run  (Read 3321 times)

Offline 29 ajs

  • Advanced Member
  • ***
  • Posts: 2
  • Karma: +0/-0
    • View Profile
villiers wont run
« on: January 15, 2016, 05:18:39 AM »
I am trying to start a 197 Villiers for a friend if I spray easystart into carb it will run for a few seconds,I have replaced fuel with fresh ,drained carb,it will not start on fuel only if I spray easystart in carb any ideas what I should look for?bowl floods when I depress primer

Offline R

  • Advanced Member
  • ***
  • Posts: 1480
  • Karma: +26/-10
    • View Profile
Re: villiers wont run
« Reply #1 on: January 15, 2016, 05:53:21 AM »
Tried a new spark plug in it ?
Old or fouled plug may need easy-to-burn easystart to be able to spark...

Tried tipping a spoonful of 2 stroke mix down the plughole, rather than easystart.
Could be your main jet is plugged or blocked off too, if it has been standing for a while and the old fuel has evaporated.

Offline iansoady

  • Advanced Member
  • ***
  • Posts: 721
  • Karma: +6/-1
    • View Profile
    • Email
Re: villiers wont run
« Reply #2 on: January 15, 2016, 10:18:10 AM »
Yes, 2 strokes should normally have the tap turned off & run till they use up the fuel in the carb when being left otherwise as said the petrol evaporates and a glob of oil is left which can neatly plug the jets.
Ian
1952 Norton ES2
1986 Honda XBR500
1958-ish Tre-Greeves

Offline mark2

  • Advanced Member
  • ***
  • Posts: 383
  • Karma: +2/-4
    • View Profile
Re: villiers wont run
« Reply #3 on: January 15, 2016, 06:50:09 PM »
crank case leak ? has it been standing for a long time , rings , f/w mag ? there are lots of reasons a 2 stroke will not run