Author Topic: trw 500 sealing clutch oil trw 500 sellado del aceite del embrague  (Read 88 times)

Offline carloss

  • Advanced Member
  • ***
  • Posts: 3
  • Karma: +0/-0
    • View Profile
    • Email
hello, I have a triumph trw 500. the motorcycle pulls me the clutch oil through the crankcase because it has not mounted any mechanism retainer of oil. I have located an oil retainer plate (Motorcycle parts Triumph 57-0000 to 57-9999
clutch 1950 2 57 - 1031 I205 pre-unit chaincase main oil disc, steel disc 3 57-1038 - 4-PADDLE EMBRAGUE CENTER - 56 57-1039 - P / U CL / SHOCK 1NNER PLATE - 25 57-1040 - CLUTCH
www.grintriumph.com/Triumph4.htm) that I have already ordered through the internet.

The question I am asking is whether it should carry anything other than a steel plate, as I imagine that the oil will continue to escape between the steel plate and the crankcase.

The bike is currently mounted as seen in these images.

hola , tengo una triumph trw 500. la moto me tira el aceite del embrague a traves del carter pues no lleva montado ningun mecanismo retenedor de aceite. He localizado  una placa retenedora de aceite (Piezas de la motocicleta Triumph 57-0000 a 57-9999 Muelle de
embrague 1950 2 57 - 1031 I205 pre-unit chaincase disco de aceite principal, disco de acero 3 57-1038 - 4-PADDLE EMBRAGUE CENTER - 56 57-1039 - P / U CL / SHOCK 1NNER PLACA - 25 57-1040 - EMBRAGUE
www.grintriumph.com/Triumph4.htm)  que ya he pedido a traves de internet.

La duda que planteo es si deberia llevar algo mas aparte de una placa de acero, pues me imagino que el aceite seguira escapandose igualmente entre la placa de acero y el carter.

La moto actualmente   esta montada como se ven en estas imagenes.


Offline carloss

  • Advanced Member
  • ***
  • Posts: 3
  • Karma: +0/-0
    • View Profile
    • Email
Re: trw 500 sealing clutch oil trw 500 sellado del aceite del embrague
« Reply #1 on: April 09, 2018, 09:20:13 AM »
the oil literally goes to jets through the space between the axis of change (clutch) and the crankcase. It has no mounted seal, check or felt.

el aceite se va literalmente a chorros por el espacio entre el eje del cambio ( embrague) y el carter. No lleva montado ningun sello, reten ni fieltro.

thanks for all help

Offline chaterlea25

  • Advanced Member
  • ***
  • Posts: 277
  • Karma: +12/-2
    • View Profile
Re: trw 500 sealing clutch oil trw 500 sellado del aceite del embrague
« Reply #2 on: April 09, 2018, 10:46:28 PM »
Hi Carlos,
This is what you need

57-1381 - OIL SEALING PLATE Pre-unit

This fits inside the spring clip shown in your photo

Regards
John

Offline carloss

  • Advanced Member
  • ***
  • Posts: 3
  • Karma: +0/-0
    • View Profile
    • Email
Re: trw 500 sealing clutch oil trw 500 sellado del aceite del embrague
« Reply #3 on: April 12, 2018, 08:20:25 PM »
Thank you