Author Topic: 1924 bsa350l24  (Read 230 times)

Offline beardyimpman

  • Advanced Member
  • ***
  • Posts: 94
  • Karma: +0/-0
    • View Profile
1924 bsa350l24
« on: September 12, 2020, 08:40:28 PM »
still wanted a front hub or wheel, thanks

Offline chaterlea25

  • Advanced Member
  • ***
  • Posts: 396
  • Karma: +14/-3
    • View Profile
Re: 1924 bsa350l24
« Reply #1 on: September 14, 2020, 09:41:25 PM »
Hi, Beardy
As the 24 models had a useless rim brake I would (and have done to my own project + another ) fit a
drum brake wheel. I have fitted one from a BSA C10/11, 5.5 inch brake and built it to a 21in. rim
On the other bike I used a Mk1 LE Velo hub
The forks will accept the 1/2in knock through axle from either hub and its not hard to attach a torque arm to where the original brake shoe pivoted on the fork leg

John

Offline beardyimpman

  • Advanced Member
  • ***
  • Posts: 94
  • Karma: +0/-0
    • View Profile
Re: 1924 bsa350l24
« Reply #2 on: September 16, 2020, 09:48:48 PM »
THANKS JOHN , I SHOULD HAVE A SPARE C10 AND AN LE HUB , WILL LOOK THEM OUT AND SEE WHAT IS THE HANDIEST TO USE, DID YOU USE BEADED EDGE TYRES, OR WIRED EDGE TYRES, I THINK MY BACK WHEEL IS A WIRED EDGE TYRE ,WHAT SIZE OF RIM DO I USE ,AM GOING TO PAINT THE RIMS,THIS WILL GET ANOTHER BIKE ON ITS WHEELS ,  THANKS JOHN

Offline chaterlea25

  • Advanced Member
  • ***
  • Posts: 396
  • Karma: +14/-3
    • View Profile
Re: 1924 bsa350l24
« Reply #3 on: September 16, 2020, 10:06:41 PM »
Hi Beardy
I used a 21in. WM1 wired on rims. built them centered on the hubs
I then made spacers to centralise the hubs in the forks

John