Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - M.Ramos

Pages: [1]
1
British Bikes / Re: any ideas?
« on: March 23, 2010, 05:05:45 PM »
Quote from: bikerisme on March 23, 2010, 12:26:58 PM
hi ramos,glad you changed the oil!,i wouldnt bother checking the valves clearance yet
you say it fired up so you must be getting a spark and the timing must be near on
the mark all this you can check once its running i would connect up a clean supply
of petrol then try and start it and get it running its no good just putting petrol
in the lines it needs a continous supply rig something up or put the tank back on
then try it if no go then look for other faults ::)

sounds great. i have to get another tank since the only one it came with is an old junky fiber glass racing tank from the early 80's and from what ive heard, fresh petrol would eat up the tank and clog my fuel system. Thanks for the tip.  :D

2
British Bikes / Re: any ideas?
« on: March 22, 2010, 05:13:42 PM »
well once i added the boyer and replaced all the junky wires, the bike was able to start up. and when i overhauled the carb, i replaced several parts as well as cleaned out every nook and cranny. ill go through it again i guess and see how that works.

3
British Bikes / Re: any ideas?
« on: March 19, 2010, 05:03:13 PM »
yea i went and changed the oil, added a boyer ignition, and re wired the whole bike. I went to a local shop the other day and they had mentioned I might want to check the valves to see if they're spaced right. So I think that'll be my next step.

4
British Bikes / any ideas?
« on: March 16, 2010, 02:51:30 AM »
Hey everyone, im new here and wanted to send my greetings, Im also new at the whole bike restoration thing and my first project is a 1969 triumh tiger. Its been in a shed for close to 20 years so I decided to bring it back to life. I completely overhauled the carb and have been able to kick start it with carb cleaner but it doesnt last that long. I filled the lines and started it up again but it sucks the gas in really quickly and kills the motor. Does anyone have any suggestions on what i should do next. Any help is appreciated. Thanks.

Pages: [1]