Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Tun up

Pages: [1] 2 3 4
1
British Bikes / Re: Monobloc
« on: May 10, 2013, 01:25:39 PM »
Thanks for the info wetdog.
Regarding the fuel issue; even with the plug in there are no traces of petrol on the plug despite repeated attempts to start the bike. If fuel was getting through and the bike won't start oughton the plug to be wet; as in flooded?
The mag has recently been fully rebuilt. The bike restarts from hot straight away; the non starting only occurs if the bike is left to cool down a little from hot. Also there is strong spark at the plug.
If after all that you still think magneto, then I'll get it checked out. Does the extra detail ring any bells?
Cheers
Tun up

2
British Bikes / Monobloc
« on: May 10, 2013, 08:57:20 AM »
1957 B31. Will not restart after being run to normal operating temperature and switched off and then allowed to cool a little. All other starting is fine. All jets are correct and the needle is on the second notch. However on a non start when turning the engine with the plug removed no petrol/air mixture can be felt through the plug hole; yet the carb has petrol.
There is a spark on ever plug used and the magneto is fine.
Any pointers much appreciated please. :)
Cheers

3
British Bikes / Re: The goverment no M.O.T.
« on: November 14, 2012, 10:27:44 PM »
I respect all veiwpoints and enjoy all motorcycles from flat tankers to; how did you put it "orrible Onda CBRs"
I don't think the VMCC have spoint any thing; quite the contrary. The bigger the motorcycle lobby the louder the voice.
Demarkation failed in the past. Why should it work with motorcycles now????
Or do you think the anti motorcycle lobby will only legislate motorcycles made after 1929 off the road? ::)
Have you thought of giving up bikes altogether and taking up stamp collecting?

4
British Bikes / Re: Researching my bike - any advice
« on: November 14, 2012, 09:19:02 PM »
Probably your best chance of finding such information is through the Norton Owners Club.
Good luck with your project.

5
British Bikes / Re: The goverment no M.O.T.
« on: November 14, 2012, 09:00:35 PM »
I'm quite happy to call any vehicle over 15 years old a classic. The first CBR 6's are now classic; every era is a classic to someone.
When Titch Allen etc first formed the VMCC they had a strick cut off point; perhaps that date and policy should be reintroduced eh ;)

6
Japanese Bikes / Re: i,ve bought a hound !
« on: November 12, 2012, 04:09:13 PM »
I always switch the petrol off a couple of hundred yards from home on my older bikes then they are just about out of juice when I pull onto my drive.
I didn't do this once on a 750K7 and in the mean time the bike was stripped and restored over a four year period. What a mess the carbs were. It took two ultra sonic cleans and a couple of thousand miles before it started to settle down.
That will never happen again

7
British Bikes / Re: 1926 BSA Basket Case
« on: November 12, 2012, 03:50:09 PM »
Don't know much about these bikes myself; but The Classic Motorcycle ran a series of articles on flat tankers and talked about their value.
Just "Google" 1926 BSA 3.49hp and loads of info should appear.

8
British Bikes / Re: The goverment no M.O.T.
« on: November 12, 2012, 03:43:36 PM »
1960 is the cut off point for MOT's  and road tax is 72 or 73. Sorry can't remember exactly which year.

9
Japanese Bikes / Re: i,ve bought a hound !
« on: November 09, 2012, 05:06:02 PM »
Mmmmm. GSX 750's have bloody strong motors; it takes a lot to break one of them.
Lets look at the positives. Motad Neta exhausts are quality items; so if its in good nick you should be ok there; also they don't require a rejet. Junk the K&N's. With the std air box fitted a carb clean and confirm the correct jets are fitted you will be well on the way to smoother running.
If when the oil is dropped there are metal bits in it then that might indicate cause for concern; so lets hope its clear. You don't know how long that oil and filter have been in there. Installing clean may make a difference. Can you select all the gears with the engine off?
These are a couple of little checks you can make and you have already ordered oil. Keep your fingers crossed and hope for the best but be prepared for the worst.
It the Suz does prove uneconomical to repair you might wish to consider breaking it for spares. That way you will recoup some of your money.
BM K100's do make great winter hacks.
Good luck with the Suz. Keep us informed how you get on eh.
Neil

10
British Bikes / Re: The goverment no M.O.T.
« on: November 09, 2012, 03:51:32 PM »
Of course things can be changed over time. Remember the Tories brought in the sliding twenty five year rule for vehicle tax. The first thing Brown did was to make the cut of point static: thus depriving many classic vehicle enthusiasts free tax >:(. I for one am not going to worry about changes that might not be made ;).

11
The Classic Biker Bar / Re: Vintage Motorcycle Helmet
« on: November 07, 2012, 06:47:09 PM »
Write to Old Bike Mart; they can help :) :)

12
The Classic Biker Bar / Re: Pictures of my 1979 Kawasaki KL250A2
« on: November 07, 2012, 06:36:27 PM »
It doesn't matter what others think; its your bike; do what u want with it.
Anyway for wot its worth; I like it; it looks cool 8) :)
Thanks for posting

13
Classic Motorcycle Sport / Re: Honda CB750K bike engine oil leak problem
« on: November 07, 2012, 06:27:21 PM »
There are oil seals in the cylinder head that over time will have gone hard; especially as the bike has been unused for a long time and these may leak engine oil. I would take the engine out and lift the head to see whats what first. Chances are it will be a simple fix.
Good luck with it :)

14
Japanese Bikes / Re: The demand for Vapour and Soda Blasting services
« on: November 07, 2012, 06:20:16 PM »
Locality is subjective unless you live on a remote Scottish Isle. Having said that the trip to deliver  the parts etc would be brilliant for most motorcyclists.
If you offer powder coating and your work is consistantly to a high enough standard then word will get round and people will seek you out and use your services.
Ultrasonics are brilliant for for Jap carbs etc. Good chromers who use triple plating are pretty thin on the ground too.
Offer high quality work; don't be a ripp off merchant and people will use your services once word gets round.
Good luck with the venture :)

15
Japanese Bikes / Re: I need rough estimate for value of my bike.
« on: November 07, 2012, 06:03:09 PM »
one dollar fifty ;D ;D ;D

Pages: [1] 2 3 4