magdyno bsa sloper

[rap]

Magdyno for bsa sloper is there a chart with information on model etc.
              
                 Thanks Graeme.

[cardan]

Hi Graeme,
not sure what kind of info you are looking for but Sloper magdynos must have changed a bit over the 1927-1935 span of the model. Vintage ones (and perhaps a year or two into the 1930s) used the one-piece alloy-bodied three-brush Lucas magneto. These early ones lacked the clutch between the drive gear on the magneto shaft and the dynamo armature, so they tended to shake themselves to bits. When you see them these days, the bodies are often damaged where the generator armature has tried to escape through the end of the case! Like most Lucas products, the magdynos are stamped with the date code: 930=September 1930 etc.
Leon

[rap]

Thanks i have about three and wonder if you can use the same parts in them all as they look the same and wan,t to make one for my 29.
             Graeme.

[cardan]

Sorry - can't help with the fine detail. You might find an expert who can, but with three magdynos in front of you you might have more info to hand than can be found easily (or reliably) in books. Set aside an evening on the kitchen table!
Leon

[rap]

Will try and sort out a goer from them all thanks for your trouble.
       Graeme.