Author Topic: 30:1 OIL MIX ???  (Read 6399 times)

Offline finchy

  • Advanced Member
  • ***
  • Posts: 5
  • Karma: +0/-0
  • not all classics are obvious
    • View Profile
    • Email
30:1 OIL MIX ???
« on: October 10, 2011, 12:41:30 AM »
What is the amount of oil do I need if it says on petrol cap 30:1
taking in to account the bike is from 1973 ( pre metric )
1 gallon = how much 2 stroke ? ???
Dave F

Offline esometisse

  • Advanced Member
  • ***
  • Posts: 96
  • Karma: +4/-0
    • View Profile
Re: 30:1 OIL MIX ???
« Reply #1 on: October 10, 2011, 08:11:37 AM »
That depends on where you are living!
The Imperial (British) Gallon holds 4546cc so that would require 151.5cc of oil for a 30:1 mixture.
The US Gallon holds only 3785cc so that would require a mere 126cc of oil to get the correct mixture!

Cheers
Andy

Offline finchy

  • Advanced Member
  • ***
  • Posts: 5
  • Karma: +0/-0
  • not all classics are obvious
    • View Profile
    • Email
Re: 30:1 OIL MIX ???
« Reply #2 on: October 11, 2011, 10:39:43 PM »
Thanx 4 speedy reply  :)
As I live in good old Blighty , then 151.5cc it is !
will modern 2 stroke cause any problems ( additives and synthetics ) taken into account or will I be better off with an old and trusted 2 stroke oil ( if there is any about )
awaiting in anticipation
Dave
Dave F

Offline esometisse

  • Advanced Member
  • ***
  • Posts: 96
  • Karma: +4/-0
    • View Profile
Re: 30:1 OIL MIX ???
« Reply #3 on: October 12, 2011, 05:52:18 PM »
I would use whatever 2-stroke oil is readily available. Your 1973 Jawa(?) certainely won't need any sophisticated ultra-modern synthetic stuff but won't be harmed by it either.
Why not show a pic of your pride and joy?

Cheers
Andy

Offline finchy

  • Advanced Member
  • ***
  • Posts: 5
  • Karma: +0/-0
  • not all classics are obvious
    • View Profile
    • Email
Re: 30:1 OIL MIX ???. Bosch Flywheel Magneto
« Reply #4 on: October 17, 2011, 11:06:27 PM »
 :(
unfortunitley I don't think that people would like to see an updated piccie of my cassie .
It got pinched last week and they ripped out all the electrics from the Bosch Flywheel Magneto , thankfully I managed to start the engine with a lot of help from a friend ( still sounds good ) .
but because the front light unit, back tailight unit have been ripped of the frame
it has left me with a humdinger the wiring is still intact from the magneto but because it has been cut I have no idea how to rewire it back ( when I get new light units ) .
Me and my mate figured out the wire for the HT Coil , 2 brews a few choice words about the offenders and much perseverance .
I would appreciate some advice ( diagram would be nicer) as the wires are coloured coded from a previous owner , but do not know who that owner was or when . 
Casal K270 1973 model from portugal ..
So in the meantime I will still show her off from her glory days and not what she looks like now ( cassie does have feelings !!)
Dave F
« Last Edit: October 17, 2011, 11:14:54 PM by finchy »
Dave F