Hi again, another question about this kickstart, I re-filled with oil as per the last response and started it and the kickstart dropped to the floor so I took the gearbox out to replace the bearings when I found the return spring had twisted and come out of its slot, I held the kickstart shaft and turned the output shaft with a drill and it stayed where it should but if I turned it slightly I could feel it dragging. Now my questions are is this how its supposed to work or do the bearings need replacing also is there supposed to be something other than the chrome shaft cover to hold the return spring in place in the slot or have I got something missing. I hope I'm not boring you with this,
Cheers Tim.
