Author Topic: two stroke mix for rd 200  (Read 4145 times)

Offline two stroke

  • Advanced Member
  • ***
  • Posts: 2
  • Karma: +0/-0
    • View Profile
    • Email
two stroke mix for rd 200
« on: February 21, 2013, 06:32:05 PM »
Hi i am about ready to start my rd 200 ,i wanted to put some two stroke in with the petrol just in case the pump dont cick in,i dont know how much 2 stroke to put in,can anyone help me out

wetdog

  • Guest
Re: two stroke mix for rd 200
« Reply #1 on: February 21, 2013, 07:25:19 PM »
i thought the pump was operated via a split cable and was balanced to the throtle . theres a mark on the pump cam which alines at full throtel ( same on suzuki i think ) either run the bike with pre mix or pump but will not run right with both .

automatic oil mix tank removed
Run 32:1 premix
« Last Edit: February 21, 2013, 07:29:53 PM by wetdog »

Offline two stroke

  • Advanced Member
  • ***
  • Posts: 2
  • Karma: +0/-0
    • View Profile
    • Email
Re: two stroke mix for rd 200
« Reply #2 on: February 26, 2013, 07:46:25 PM »
ok bud thanks for your advice i just wanted to make sure i did'nt seese it up ,it has'nt been started for
at leest ten years,shall i turn the pump on full when i turn it over just to make sure plenty of oil gets in
regards tony

wetdog

  • Guest
Re: two stroke mix for rd 200
« Reply #3 on: February 27, 2013, 08:55:02 AM »
is it the electric start model ? take the plugs out and put a small amount of two stroke oil down the boars , the problem ive had with left standing jap two strokes are the seals some times stick to the crank when standing , when you turn it over they tear so its a rebuild , good luck this is not always the case and the yamaha is one of the best for me