Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - jensen

Pages: [1]
1
Identify these bikes! / Re: Please can anybody identify this bike?
« on: October 04, 2011, 08:08:24 PM »
Found some pictures from a Brennabor witch has a exact same stripes on frame as my frame does. Brennabor had also model nameplates attached on front fender. Similar are also stripes and paint pattern on both fenders. The tank looks a bit different. Current model I've found from net has a Sachs 98 ccm engine with pedals. Unfortunately I've found no Brennabor models with a kickstarter engine so far. Any ideas -  does Brennabor had this kind of models in production?

2
Identify these bikes! / Re: Please can anybody identify this bike?
« on: June 30, 2011, 10:25:01 AM »
Hi, there some pics from a cap.

3
Identify these bikes! / Re: Please can anybody identify this bike?
« on: June 23, 2011, 11:11:43 AM »
Quote from: RichP on June 22, 2011, 05:25:46 PM
Are the threads metric or Imperial ? That will narrow things down a bit.
All threads are metric indeed.

Quote from: esometisse on June 22, 2011, 09:16:48 PM
this can't be the real frame number. The whole point of numbering a frame is to do it in a way that it can't be removed easily.
Remove the front forks from your bike and your "frame number" is gone - doesn't make sense. So this number is a dead end.
It could be that your bike has no frame number at all - a lot of manufacturers did only number their engines.
Good point - but have seen some manufacturer's frame labels are for example on a chain protector (!) or on a rear swing which is fixed with bolts to a main frame - both are easily removed and doesn't make sense at all :).

Quote from: esometisse on June 22, 2011, 09:16:48 PM
And you could show us how the fuel tank cap is held on - this too could point in a certain direction - mainland Europe or UK manufacturer.
I will make some pictures from a cap soon.

4
Identify these bikes! / Re: Please can anybody identify this bike?
« on: June 22, 2011, 11:21:25 AM »
Thanks - looking hard but there's also no hints about Granby as a motorbike manufacturer so far. No reasonable place found for nameplate on frame also. There's opinions from other forums about that it might be a motorbike from some German manufacturer (especially because of a front end design - it looks like pretty standard piece on German bikes from 30's and 40's). 6-digit frame number would give rise to think as a pretty large manufacturer. The frame numbers of some producers match with some models (e.g. Miele H3, DKW Block 200), but unfortunately different look and design.

5
Identify these bikes! / Re: Please can anybody identify this bike?
« on: June 21, 2011, 10:28:01 AM »
Sorry guys. There some pictures.

6
Identify these bikes! / Re: Please can anybody identify this bike?
« on: June 21, 2011, 07:39:26 AM »
Quote from: cardan on June 20, 2011, 11:44:18 PM
Can we see a photo of the tank that the transfer is on?
Hi,
the image on the tank is nearly completely destroyed - therefore, it can be only show as a figure. The image on the tank is visible  at an certain angle seen against the light. The tank was overpainted and the image scratched. There some pictures:

7
Identify these bikes! / Re: Please can anybody identify this bike?
« on: June 20, 2011, 09:51:24 PM »
Quote from: rogerwilko on June 20, 2011, 09:14:58 PM
Someones doodling??
Hard to believe that - image's quality was relatively high, with red-golden colors. Similar badge I've been seen in some british bicycles.
http://oldbike.wordpress.com/1944-royal-ladies-bicycle/
http://www.flickr.com/photos/smallwheelsociety/1407504927/
any ideas?

8
Identify these bikes! / Please can anybody identify this bike?
« on: June 20, 2011, 12:20:50 PM »
Hello,
I need help to identifying the bike badge found from tank:

Thanks

Pages: [1]