P Model Piston

[pmodel]

Could anyone advise me as to where I could get an original piston for a P Model triumph from.


Cheers

p model

[TriSpec]

You might be lucky enough to find an original cast iron piston at an autojumble/swapmeet, otherwise an alloy substitute would be quite acceptable.
I may be able to help if you contact me direct with numbers and letters from your machine for my research records. You may also be interested in the booklet which I have written which covers the Model P, in my 'Triumph - The Facts' series of booklets.

<peter@triumph.gen.nz>

Peter C.
Triumph Specialist for the VMCC, of Britain.

[pmodel]

Cheers Peter for your advice, I have tried all that you mentioned & some more, to date I have tried toyota celica pistons ( same bore different gudegeon & pin height) plenty of work on the lathe but they work, the main issue I have is they melt down, dont know if it is running lean that causes it, some other P Models in the club dont seem to have the same problem, but all built the same, if you have any ideas or possible explanation please advise.


Cheers

Shane (P Mode)
Australia