Hi Blue
The SR series of mags are one of the most reliable and easy to work on.
The resistance measurements should be, Primary coil 1.2 ohm, secondary coil 5k ohm (this is measured with an Avo model 8 analogue meter, other meters will give a slight variation), the capacitor is easily eliminated as this is a separate unit which is easy to replace, however if the coil is the original one you should seriously consider having it rewound as the insulation and wire used will be in poor condition by now, the rewind on these is relatively cheap as it is a moving magnet rotor the coil is a separate unit easily removed and rewound.
If you have the unit stripped for any length of time wrap an old chain round the rotor to act as a keeper.
