hello, I have a triumph trw 500. the motorcycle pulls me the clutch oil through the crankcase because it has not mounted any mechanism retainer of oil. I have located an oil retainer plate (Motorcycle parts Triumph 57-0000 to 57-9999
clutch 1950 2 57 - 1031 I205 pre-unit chaincase main oil disc, steel disc 3 57-1038 - 4-PADDLE EMBRAGUE CENTER - 56 57-1039 - P / U CL / SHOCK 1NNER PLATE - 25 57-1040 - CLUTCH
www.grintriumph.com/Triumph4.htm) that I have already ordered through the internet.
The question I am asking is whether it should carry anything other than a steel plate, as I imagine that the oil will continue to escape between the steel plate and the crankcase.
The bike is currently mounted as seen in these images.
hola , tengo una triumph trw 500. la moto me tira el aceite del embrague a traves del carter pues no lleva montado ningun mecanismo retenedor de aceite. He localizado una placa retenedora de aceite (Piezas de la motocicleta Triumph 57-0000 a 57-9999 Muelle de
embrague 1950 2 57 - 1031 I205 pre-unit chaincase disco de aceite principal, disco de acero 3 57-1038 - 4-PADDLE EMBRAGUE CENTER - 56 57-1039 - P / U CL / SHOCK 1NNER PLACA - 25 57-1040 - EMBRAGUE
www.grintriumph.com/Triumph4.htm) que ya he pedido a traves de internet.
La duda que planteo es si deberia llevar algo mas aparte de una placa de acero, pues me imagino que el aceite seguira escapandose igualmente entre la placa de acero y el carter.
La moto actualmente esta montada como se ven en estas imagenes.
