Author Topic: Great Uncle Ben's 1920's bike...any ideas?  (Read 7847 times)

Offline sadbrewer

  • Advanced Member
  • ***
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Great Uncle Ben's 1920's bike...any ideas?
« on: August 13, 2018, 12:46:52 AM »
Hi all...I'm wondering if anyone can ID this bike from a poor photo, I appreciate it's hard to make out but on looking at it for hours it appears to have an acetylene headlight, hand change on the tank and possibly a single pushrod engine... JAP?
   Any thoughts or clues would be appreciated.

Offline Bear640

  • Advanced Member
  • ***
  • Posts: 23
  • Karma: +0/-0
    • View Profile
Re: Great Uncle Ben's 1920's bike...any ideas?
« Reply #1 on: August 13, 2018, 05:52:12 AM »
I,d put $20 on it that’s it’s an AJS?   Dunno...

Offline R

  • Advanced Member
  • ***
  • Posts: 1517
  • Karma: +26/-10
    • View Profile
Re: Great Uncle Ben's 1920's bike...any ideas?
« Reply #2 on: August 13, 2018, 09:48:46 AM »
Well thats an interesting one, nothing very common I suspect.

Front lower mounted magneto and a front brake can only make it mid to later 1920s,
and what looks to be either both pushrods in a single tube, or maybe even ohc make it one of a very select field.
Which I can't quite put a name to at this stage, although it looks familiar.

Calthorpe ?
Certainly the engine could be in the same family, although the details are not entirely a good match ?


We will see if it jumps out at someone...



Offline mini-me

  • Advanced Member
  • ***
  • Posts: 1084
  • Karma: +19/-24
    • View Profile
    • Email
Re: Great Uncle Ben's 1920's bike...any ideas?
« Reply #3 on: August 13, 2018, 11:43:13 AM »
WU reg april 1926 to feb 1927 which narrows it age a bit

Yorkshire reg office

Offline JimD

  • Advanced Member
  • ***
  • Posts: 5
  • Karma: +0/-0
    • View Profile
    • Email
Re: Great Uncle Ben's 1920's bike...any ideas?
« Reply #4 on: August 14, 2018, 02:21:25 AM »
I think its a Calthorpe.

Cheers
Jim

Offline sprocket-in-my-socket

  • Advanced Member
  • ***
  • Posts: 17
  • Karma: +0/-0
    • View Profile
    • Email
Re: Great Uncle Ben's 1920's bike...any ideas?
« Reply #5 on: August 16, 2018, 06:33:33 PM »
Front end (fork, brake, tank, etc.) looks somehow like New Hudson of about 1927.
That would match with registration info also, if new Hudson would be the chassis.
Maybe a customized New Hudson with Calthorpe engine ?

Regards,
Helmut
« Last Edit: August 16, 2018, 06:39:14 PM by sprocket-in-my-socket »

Offline sprocket-in-my-socket

  • Advanced Member
  • ***
  • Posts: 17
  • Karma: +0/-0
    • View Profile
    • Email
Re: Great Uncle Ben's 1920's bike...any ideas?
« Reply #6 on: August 16, 2018, 10:47:04 PM »
see New Hudson from 1927 catalogue for comparison:
« Last Edit: August 16, 2018, 11:01:00 PM by sprocket-in-my-socket »

Offline cardan

  • Advanced Member
  • ***
  • Posts: 1216
  • Karma: +19/-5
    • View Profile
    • earlymotor.com
    • Email
Re: Great Uncle Ben's 1920's bike...any ideas?
« Reply #7 on: August 17, 2018, 01:06:10 AM »
Maybe a customized New Hudson with Calthorpe engine ?

Which had to be canted slightly forward to fit in the frame?

My immediate thoughts on this bike were "Calthorpe", but when I looked at the model range I could make no sense of it. New Hudson (or similar) with Calthorpe motor is not a bad guess. The depression was a time for making do with what was about.

Cheers

Leon

Offline JimD

  • Advanced Member
  • ***
  • Posts: 5
  • Karma: +0/-0
    • View Profile
    • Email
Re: Great Uncle Ben's 1920's bike...any ideas?
« Reply #8 on: August 17, 2018, 02:11:01 AM »
I dont think the frame is New Hudson, the top tank rail is in different to a New Hudson.

Cheers
Jim

Offline sprocket-in-my-socket

  • Advanced Member
  • ***
  • Posts: 17
  • Karma: +0/-0
    • View Profile
    • Email
Re: Great Uncle Ben's 1920's bike...any ideas?
« Reply #9 on: August 17, 2018, 07:02:04 AM »
Hello Jim,
at Uncle Ben´s bike on photo above it is quite hard for me to see much details about frame shape.
Your shown frame seems also a bit older than 1927th frame style of New Hudson, like shown above from catalogue.
And it looks also different in details.
I don´t think that all New Hudson frames look identical.
Of course, it could be also another make than New Hudson. It was just an idea that it could be an New Hudson.

Regards,
Helmut
« Last Edit: August 17, 2018, 09:10:48 AM by sprocket-in-my-socket »

Offline R

  • Advanced Member
  • ***
  • Posts: 1517
  • Karma: +26/-10
    • View Profile
Re: Great Uncle Ben's 1920's bike...any ideas?
« Reply #10 on: August 17, 2018, 10:06:36 AM »
Did Calthorpe supply engines to other makers ?

Offline cardan

  • Advanced Member
  • ***
  • Posts: 1216
  • Karma: +19/-5
    • View Profile
    • earlymotor.com
    • Email
Re: Great Uncle Ben's 1920's bike...any ideas?
« Reply #11 on: August 17, 2018, 10:35:06 AM »
Did Calthorpe supply engines to other makers ?

I don't think so.

Leon

Offline Rex

  • Advanced Member
  • ***
  • Posts: 1534
  • Karma: +11/-69
  • I love YaBB 1G - SP1!
    • View Profile
Re: Great Uncle Ben's 1920's bike...any ideas?
« Reply #12 on: August 17, 2018, 04:16:47 PM »
I don't know what make Uncle Ben's bike is, but at least it's not a rice-burner. 8)