Author Topic: Stud Thread size  (Read 8185 times)

Offline ramwing7

  • Advanced Member
  • ***
  • Posts: 40
  • Karma: +0/-0
    • View Profile
Stud Thread size
« on: October 09, 2021, 03:09:24 PM »
I have a 1963 Norton Electra.
One of the breaker point pillar stud bolts has broken off.
I've extracted the remains, refilled the hole, and ordered new studs.

Thing I need to know is the size tap I should use to rethread the hole.

Anybody know that?

Many thanks.

Offline L.A.B.

  • Advanced Member
  • ***
  • Posts: 1534
  • Karma: +32/-4
    • View Profile
Re: Stud Thread size
« Reply #1 on: October 09, 2021, 04:09:18 PM »
Points assembly pillar bolts are usually 2BA but I can't find a part number for them so what is the diameter and TPI?
L.A.B.

Offline iansoady

  • Advanced Member
  • ***
  • Posts: 734
  • Karma: +6/-1
    • View Profile
    • Email
Re: Stud Thread size
« Reply #2 on: October 09, 2021, 04:41:53 PM »
He'll struggle to meaure the tpi of a BA thread with a conventional thread gauge..... However, meauring the major diameter (in mm) should give the BA size. 2BA would be 4.7mm and 1.234568 threads /mm. 3/16" BSW is a similar diameter but 24 tpi.
Ian
1964 Norton Electra
1969 BSA/Suzuki
1992 Yamaha 250SRV

Offline Rex

  • Advanced Member
  • ***
  • Posts: 1534
  • Karma: +11/-69
  • I love YaBB 1G - SP1!
    • View Profile
Re: Stud Thread size
« Reply #3 on: October 09, 2021, 05:44:48 PM »
I can't think they'd use a Whit thread here, but can't you check the remaining stud with a 2BA nut?

Offline ramwing7

  • Advanced Member
  • ***
  • Posts: 40
  • Karma: +0/-0
    • View Profile
Re: Stud Thread size
« Reply #4 on: October 10, 2021, 06:23:45 PM »
Thanks.

My kanoodling got me to 5mm, so I must be in the ballpark.

Offline R

  • Advanced Member
  • ***
  • Posts: 1517
  • Karma: +26/-10
    • View Profile
Re: Stud Thread size
« Reply #5 on: October 10, 2021, 10:23:42 PM »
How different are these to Commando ones - which are 2BA
And a shade over an inch long - overall.

btw, a 5mm nut will thread onto these - as a rather loose fit.

« Last Edit: October 10, 2021, 10:33:31 PM by R »

Offline Rex

  • Advanced Member
  • ***
  • Posts: 1534
  • Karma: +11/-69
  • I love YaBB 1G - SP1!
    • View Profile
Re: Stud Thread size
« Reply #6 on: October 11, 2021, 08:56:54 AM »
It may wind on, but I'd never describe it as any sort of "fit".
Rather like OBA and M6, slack as something very slack, although there have been claims of interchangeability by some... :-X

Offline R

  • Advanced Member
  • ***
  • Posts: 1517
  • Karma: +26/-10
    • View Profile
Re: Stud Thread size
« Reply #7 on: October 11, 2021, 06:40:23 PM »
BA is a metric-based thread system.
Only the English could take that and mangle it just enough to call their own !?

It may not be any sort of 'fit' at all, but the 5mm going on at all means you can test what it may be.

Offline Rex

  • Advanced Member
  • ***
  • Posts: 1534
  • Karma: +11/-69
  • I love YaBB 1G - SP1!
    • View Profile
Re: Stud Thread size
« Reply #8 on: October 11, 2021, 10:37:05 PM »
Given that BA stands for "British Association" I take it that you really mean British rather than English? That said, and given that it was a thread based on metric units, it wasn't "mangled" from anything else.
One of the most useful of the small threadforms, and far better than the metric series or the dreadful Unified small sizes.

Offline R

  • Advanced Member
  • ***
  • Posts: 1517
  • Karma: +26/-10
    • View Profile
Re: Stud Thread size
« Reply #9 on: October 12, 2021, 06:24:39 AM »
Hmmmmmm ?

Offline 33d6

  • Advanced Member
  • ***
  • Posts: 1123
  • Karma: +27/-4
  • I love YaBB 1G - SP1!
    • View Profile
Re: Stud Thread size
« Reply #10 on: October 12, 2021, 08:33:56 AM »
Give over you two. We all know it's 2BA. It's British electrical, what else is it going to be?
I like the BA thread. It's a practical thread form that makes for a much sturdier screw than comparitive sizes in other formats. The 47.5 degree form gives you a greater core diameter than the common 55/60 degree forms used by metric, US and Whitworth. Its a format designed for fine work in small diameters and it does it well. Yes, it's day is mostly done because electronic instrumentation and the microchip has taken over much of the old mechanical instruments of yore that it was intended for but that doesn't alter it's effectiveness.

Having a background of nutters who played with this stuff before I was a twinkle in my father's eye I now have the family accumulation of BA, Whitworth and SAE taps, dies and some ISO metric God Wot. BA is by far the sanest for small stuff. Just don't get me started on small ISO Metric.



 

 

Offline iansoady

  • Advanced Member
  • ***
  • Posts: 734
  • Karma: +6/-1
    • View Profile
    • Email
Re: Stud Thread size
« Reply #11 on: October 12, 2021, 11:39:58 AM »
I agree that BA is a very logical thread series. Its only drawback for me is that it can't (at least not with any facility) be screwcut in the lathe which is what I prefer for male threads.
Ian
1964 Norton Electra
1969 BSA/Suzuki
1992 Yamaha 250SRV

Offline Rex

  • Advanced Member
  • ***
  • Posts: 1534
  • Karma: +11/-69
  • I love YaBB 1G - SP1!
    • View Profile
Re: Stud Thread size
« Reply #12 on: October 12, 2021, 06:42:43 PM »
Treat yourself (if you haven't already got one) to a tailstock die holder if you need to cut a BA thread on a lathe. Life really is too short to screwcut a BA thread on a lathe though..

Offline DM

  • Advanced Member
  • ***
  • Posts: 55
  • Karma: +0/-0
  • I love YaBB 1G - SP1!
    • View Profile
Re: Stud Thread size
« Reply #13 on: October 12, 2021, 07:16:04 PM »
Even better is to get yourself a coventry die head.

Offline Rex

  • Advanced Member
  • ***
  • Posts: 1534
  • Karma: +11/-69
  • I love YaBB 1G - SP1!
    • View Profile
Re: Stud Thread size
« Reply #14 on: October 12, 2021, 10:06:38 PM »
Yeah, if you're made of money... ::)
Hardly justifiable for the use-it-now-and-again amateur.