Author Topic: 1952 PLUNGER JAMES 197  (Read 1267 times)

Offline beardyimpman

  • Advanced Member
  • ***
  • Posts: 126
  • Karma: +0/-0
    • View Profile
1952 PLUNGER JAMES 197
« on: August 25, 2022, 10:27:49 PM »
WANTED EXHAUST PIPE AND SILENCER FOR MY OILY RAG BIKE ,WHAT HAVE YOU CHROIUM NOT IMPORTANT , THANKS , JOHN


Offline 33d6

  • Advanced Member
  • ***
  • Posts: 1098
  • Karma: +27/-4
  • I love YaBB 1G - SP1!
    • View Profile
Re: 1952 PLUNGER JAMES 197
« Reply #2 on: August 26, 2022, 11:11:07 AM »
Ran one of those for many years until I let a mate talk me out of it. Foolish me.
I see the owner/maker of that particular silencer has made the standard mistake of too large a tail pipe. These old Villiers engines like a bit of back pressure. The original factory silencer used the same 1” tail pipe as fitted to the 98cc James Comet. That particular example looks good but will be both noisier and deliver slightly less power than  the original design.
The old factories might not have known as much about two stroke exhausts as taught us by MZ but they knew far more than we give them credit for.
Cheers,

Offline Rex

  • Advanced Member
  • ***
  • Posts: 1509
  • Karma: +11/-69
  • I love YaBB 1G - SP1!
    • View Profile
Re: 1952 PLUNGER JAMES 197
« Reply #3 on: August 26, 2022, 07:36:54 PM »
My first ever bike pile of parts. Got it in exchange for a Matchie gearbox left behind by my Ten Pound Pom brother, and later swapped it for a couple of a quid and an Alice Cooper LP.
A valuable lesson learnt...it's always better cheaper and easier to buy a complete bike than a load of of parts purporting to be most of a bike.

Offline beardyimpman

  • Advanced Member
  • ***
  • Posts: 126
  • Karma: +0/-0
    • View Profile
Re: 1952 PLUNGER JAMES 197
« Reply #4 on: August 27, 2022, 07:58:20 PM »
thanks for replies the pictures  of the james is identical to mine , thought it was my bike , any exhaust like this in any condition is fine , thanks john